top of page

Panning Across Canada

Public·10 members
Charles Vlasov
Charles Vlasov

Ite It8875f Parallel Port Driver Windows 7 __HOT__


Drivers for IT8875FITE make a PCI parallel port chip, the 8875F, and provide reference drivers which won't work if the device is behind a PCI to PCI bridge, because they try to use legacy ISA port addresses.It is possible to set the chip up to use native PCI port addresses instead, and I have developed some drivers which do this and should work on all PC's. The source code shows you how to install multifunction devices on Windows.Files in the packagetompcix.inf - install fileThe INF file will install e887x.com on Windows 9x/Me and E887xflt.sys. It will also set up the device as a multifunction device so that the Windows parallel drivers will be able to find it.e887x.com - Dos/Win98/WinMe enablerE887x.com is for Dos/Windows 98/Windows Me. It initialises the device, and writes the LPT port address into the Bios Data area. If you don't have windows, you can install this by hand and add it to you autoexec.bate887xflt.sys - WDM filter enablerE887xflt.sys is a WDM driver which installls as a LowerFilter under MF.sys and initialises the device before the Windows parallel port drivers get control of it.You need NASM to build e887x.com, and the Windows DDK to build E887xflt.sys.I have tested these drivers on Windows 98 and Windows XP. They should work on Windows 2000 and Windows ME too. NT 4.0 is not supported.




Ite It8875f Parallel Port Driver Windows 7


About

Welcome to the group! You can connect with other members, ge...

Members

bottom of page